Detailed Product Description

Product Description:   A premium quality, clear colour, medium strength adhesive formulated for PVC and uPVC fitting and pipes bonding applications. It is easy-to-use, fast setting and offers superior bonding strength.           

Applications:   Ideal for bonding and coupling of rigid PVC and uPVC pipes up to 100mm diameter. It is safe for drinking water upon complete curing, irrigation, waste water, sanitary pipes and conduit etc.

Directions: Surfaces must be clean, dry and free of dirt, grease, oil or water.

Roughen mating surfaces to the full depth of socket using medium glass paper or emery cloth.

Apply the solvent cement to both surfaces to be bonded with a dry, clean brush to give a uniform coating, with heavier coat at the pipe end.

It will dissolve and soften the surfaces of the pipes and fitting. Assemble while cement is wet.

When the pipes and fitting are assemble together, the softened surfaces mix and on hardening produce a chemically welded joint.

Hold firmly for 20 seconds to allow initial bonding, then remove surplus solvent cement and should not be disturbed for 5 minutes.

8 hours for drying time should be allowed before working pressure, and 24 hours before testing to 1 ½ working pressure.

Safety and first aid directions: Avoid contact with eyes, skin and mouth.

Use in well ventilated area. In case of contact with eyes, flush with water immediately for 15 minutes. If irritation persists, seek medical attention.

Keep out of reach of children.

Storage ; Highly inflammable, keep away from heat source or naked flames. Store in dry and cool place with temperature below +25°C.

            Use within 12 months from date of production.